DAMP PRESENTS A BIG PROBLEM IN NIGERIA .

-
Talking about  problems, one major challenges that has a major effect on the society is the “dampness” issue. Water and moisture is the main reason behind the dampness in flats or buildings that crops up again and again. If the foundation is set right with correct waterproofing techniques, then dampness would not be a problem to begin with.

A lot of people have a major scare in their buildings due to constant dampness. A few kids in the buildings developed fungal infections due to living in wet and humid homes. An elderly person with respiratory troubles may begin to find it difficult to breathe due to the mould growing on the walls home. With everyone’s health being affected , you should decided to hire a waterproofing expert to put an end to the dampness.

The simple fact is that cement by nature shrinks over a period of time causing cracks in plaster or concrete is the reason behind chronic dampness and leaks. We advise on the importance of maintaining  water-cement ratio in order to ensure the problem does not arise.

The simple, effective and affordable solution to put an end to the dampness was to opt for a long lasting waterproofing solution like PROSEAL DAMP CURE OR PROSEAL DP BARRIER, they not only enhances and modifies the properties of cement but also prevents any kind of cracks and corrosion on the structure, hence tackling the dampness . Call us on 08090662382 for more information about these products.


Comments

Post a Comment

Popular posts from this blog

WHEN TO USE NEGATIVE SIDE WATERPROOFING

-
Image
While negative-side waterproofing is not the usual first choice in new construction of foundations, it clearly has its place. It is often selected as the last resort when other options (positive and blind sides) are impractical. Often, negative-side waterproofing is better than re-excavating the entire structure when the original waterproofing materials fail and water is actively leaking. Using nagetive side waterproofing on this basement walls because we can't excavate the foundation. When positive-side and blindside waterproofing are applied, water under hydrostatic pressure would not permeate the foundation and the building is expected to remain dry for life. Unfortunately, this is not always the case, and the solution either involves excavating the foundation to conduct repairs or retrofitting the insides of the wall with a negative-side waterproofing application. Excavating the foundation to apply positive side waterproofing. Negative-side waterproofing
Read more

TYPES OF WATERPROOFING IN CONSTRUCTION

-
Image
Terrace Waterproofing Waterproofing of flat terraces is a tricky problem in building construction, mainly because the surfaces are flat. This means that the water cannot run off the structure quickly, and will move slowly or pool above the surface, creating opportunities for leakage. PROSEAL terrace waterproofing products are recommended Roof Waterproofing Roof Waterproofing is ideal for buildings and structures that are already having leakage or damage as well as for new structures to avoid leakage in future.This process helps in maintaining the life and quality of the building and ensures that there is no damage to the building because of the rains. PROSEAL roof waterproofing products gives 10 years warranty.  Basement Waterproofing Basement waterproofing refers to techniques or materials used to help prevent water from penetrating the basement of a house or a building. Waterproofing a basement that is below ground level involves both, the application of materials and sealants,and po
Read more

KNOWING THE DIFFERENT TYPES OF CRACKS AND THE CAUSES IN CONCRETE

-
When you see a crack in your concrete slab or wall, your first assumption is typically that something has been done wrong–but that’s not always the case. Actually, concrete cracks are very common, some are even inevitable. “Even with the best floor designs and proper construction, it is unrealistic to expect crack-free and curl-free floors. Consequently, every owner should be advised by both the designer and contractor that it is normal to expect some amount of cracking and curling on every project, and that such occurrences do not necessarily reflect adversely on either the adequacy of the floor’s design or the quality of its construction” I will explain 6 of the most common types of concrete cracks below. 1. Plastic shrinkage concrete cracks When concrete is still in its plastic state (before hardening), it is full of water. When that water eventually leaves the slab, it leaves behind large voids between the solid particles. These empty spaces make the concrete weaker and more prone
Read more