GIVING LIFE TO CONCRETE WITH WATERPROOFING ADMIXTURES

-
When you are waterproofing concrete, blicks and other cement-based surfaces you prolong the life and durability of the structure. Know that keeping water out of concrete is a great step toward better longevity. In most countries, if you have concrete or block structures, it is required by law and building code to waterproof these structures. A high water table,or  flood-prone areas dictate these types of waterproofing codes. In high-rise buildings, all substructures have to be waterproofed. They are load-bearing walls for incredibly heavy complexes and a material breakdown is unacceptable.
 
It's should be noted that water breaks down concrete, not only does it start looking bad, but it’s also getting weaker. You have probably seen surface damage on walls or old mortar. The concrete erodes, exposing matrix materials and base concrete. In extreme cases, water will destroy concrete quickly, but generally, it takes a few years to start showing. If you see damage on the surface of the concrete, it’s a safe bet the underlying structure of your wall or floor is damaged too. If you want a concrete project to maintain its strength and fresh appearance, you need to waterproof it. When you waterproof concrete you are also protecting the re-bar inside the concrete from rusting and eroding.

 Benefits of waterproofing concrete.

*It prevents mold and mildew from getting into the walls and floor. This makes waterproofing essential to structural integrity and health.
*It reduces maintenance costs and clean-up. Basic maintenance is much easier, the waterproof factor keeps things clean.
*Waterproofed walls and floors increase property value. When the time comes to sell, a solid foundation is a good selling point. No one wants to buy a house with water problems.
 
The importance of quality materials.

Make sure you use high-quality products to waterproof your concrete. Inferior products waste too much time and money. At PROSEAL we have experience in manufacturing and applying all types of waterproofing systems. When you are ready for more information on concrete waterproofing please contact us on 08090662382.

Comments

Post a Comment

Popular posts from this blog

WHEN TO USE NEGATIVE SIDE WATERPROOFING

-
Image
While negative-side waterproofing is not the usual first choice in new construction of foundations, it clearly has its place. It is often selected as the last resort when other options (positive and blind sides) are impractical. Often, negative-side waterproofing is better than re-excavating the entire structure when the original waterproofing materials fail and water is actively leaking. Using nagetive side waterproofing on this basement walls because we can't excavate the foundation. When positive-side and blindside waterproofing are applied, water under hydrostatic pressure would not permeate the foundation and the building is expected to remain dry for life. Unfortunately, this is not always the case, and the solution either involves excavating the foundation to conduct repairs or retrofitting the insides of the wall with a negative-side waterproofing application. Excavating the foundation to apply positive side waterproofing. Negative-side waterproofing
Read more

TYPES OF WATERPROOFING IN CONSTRUCTION

-
Image
Terrace Waterproofing Waterproofing of flat terraces is a tricky problem in building construction, mainly because the surfaces are flat. This means that the water cannot run off the structure quickly, and will move slowly or pool above the surface, creating opportunities for leakage. PROSEAL terrace waterproofing products are recommended Roof Waterproofing Roof Waterproofing is ideal for buildings and structures that are already having leakage or damage as well as for new structures to avoid leakage in future.This process helps in maintaining the life and quality of the building and ensures that there is no damage to the building because of the rains. PROSEAL roof waterproofing products gives 10 years warranty.  Basement Waterproofing Basement waterproofing refers to techniques or materials used to help prevent water from penetrating the basement of a house or a building. Waterproofing a basement that is below ground level involves both, the application of materials and sealants,and po
Read more

KNOWING THE DIFFERENT TYPES OF CRACKS AND THE CAUSES IN CONCRETE

-
When you see a crack in your concrete slab or wall, your first assumption is typically that something has been done wrong–but that’s not always the case. Actually, concrete cracks are very common, some are even inevitable. “Even with the best floor designs and proper construction, it is unrealistic to expect crack-free and curl-free floors. Consequently, every owner should be advised by both the designer and contractor that it is normal to expect some amount of cracking and curling on every project, and that such occurrences do not necessarily reflect adversely on either the adequacy of the floor’s design or the quality of its construction” I will explain 6 of the most common types of concrete cracks below. 1. Plastic shrinkage concrete cracks When concrete is still in its plastic state (before hardening), it is full of water. When that water eventually leaves the slab, it leaves behind large voids between the solid particles. These empty spaces make the concrete weaker and more prone
Read more